Yamaha ELC-02 ELC-02/ELCU-M02 Owners Manual - Page 203
Press the lock lever downward, then, with the seating surface face down.
![]() |
View all Yamaha ELC-02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
3 Open the legs, then secure one side to the hooks (as shown), making sure they are locked in. Using the Bench (if included) 5 To fold back, put the bench on the floor with the seating surface face down. Hooks 4 Turn over the bench as shown in the illustration. The lock is at the rear side of the bench. Lock lever 6 Press the lock lever downward, then press the leg not having the lock, then release the hooks while closing the legs. Lock lever Caps To keep the stand from teetering, adjust the two oblong shaped caps (on the side of the lock lever), rotating them as necessary. NOTE When rotating the caps, pull them outward slightly (about 10 mm) for ease in rotating. After making adjustments, push them back inside. 7 Reverse the sequence of steps 1 - 2 to fold back the bench. 14 Appendix ELC-02/ELCU-M02 Owner's Manual 203
![](/manual_guide/products/yamaha-elc02-elc02elcum02-owners-manual-9285ecc/203.png)