ZyXEL ARMOR Z1 User Guide - Page 103
LAN IP Screen
View all ZyXEL ARMOR Z1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Chapter 12 LAN Figure 65 LAN and WAN IP Addresses The LAN parameters of the ARMOR Z1 are preset in the factory with the following values: • IPv4 address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits) • DHCP server enabled with 32 client IPv4 addresses starting from 192.168.1.33. These parameters should work for the majority of installations. 12.4 LAN IP Screen Use this screen to change the IP address for your ARMOR Z1. Click Expert > LAN > LAN IP. Figure 66 Expert > LAN > LAN IP The following table describes the labels in this screen. Table 38 Expert > LAN > LAN IP LABEL DESCRIPTION IP Address Type the IP address of your ARMOR Z1 in dotted decimal notation. IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your ARMOR Z1 will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the ARMOR Z1. ARMOR Z1 User's Guide 103