ZyXEL ARMOR Z1 User Guide - Page 90
Wireless Security, 11.3.1 No Security, No Security
View all ZyXEL ARMOR Z1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Chapter 11 Wireless LAN Table 28 Expert > Wireless (continued) LABEL DESCRIPTION Security Mode Select WPA2-PSK to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as this device. After you select to use a security, additional options appears in this screen. See Section 11.3 on page 90 for detailed information on different security modes. Or you can select No Security to allow any client to associate this network without authentication. Apply Cancel Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are available in this field. Click Apply to save your changes back to the ARMOR Z1. Click Cancel to reload the previous configuration for this screen. See the rest of this chapter for information on the other labels in this screen. 11.3 Wireless Security The screen varies depending on what you select in the Security Mode field. 11.3.1 No Security Select No Security to allow wireless clients to communicate with the access points without any data encryption. Note: If you do not enable any wireless security on your ARMOR Z1, your network is accessible to any wireless networking device that is within range. Figure 55 Expert > Wireless > Security Mode: No Security ARMOR Z1 User's Guide 90