ZyXEL ARMOR Z1 User Guide - Page 35
LED
View all ZyXEL ARMOR Z1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 5 Easy Mode The following table describes the labels in this screen. Table 15 Easy Mode: Wi-Fi LABEL DESCRIPTION Wireless Radio Choose whether you want to apply the wireless security to 2.4G Hz, 5G Hz or Both wireless radios. Network Name (SSID) (Service Set IDentity) The SSID identifies the Service Set with which a wireless station is associated. Wireless stations associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN. Security Mode Select WPA2-PSK to enable data encryption. Or Select No Security to allow wireless clients to communicate with the access points without any data encryption. Password This field appears when you choose wither WPA2-PSK as the security mode. Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. Verify Password Type the password again to confirm. Cancel Click Cancel to reload the previous configuration for this screen. Apply Click Apply to save your changes back to the ARMOR Z1. 5.6.5 LED Switch ON to turn on the LEDs (lights) on the ARMOR Z1. Otherwise, switch OFF. ARMOR Z1 User's Guide 35