ZyXEL P-100 User Guide - Page 112
Table 10-3., System Maintenance Menu Diagnostic Test Options, Fields, Description
View all ZyXEL P-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Prestige 100WH Internet Access Router The following Table describes the eight diagnostic test options available in Menu 24.4. Table 10-3. System Maintenance Menu Diagnostic Test Options Fields Description Drop WAN Port This command will drop the current call. Reset WAN Port This command will reset the WAN Port. Redirect to WAN Port This command will redirect the keyboard to the WAN Port. Anything you type will be sent to the WAN device and the device's response will be shown on your terminal. Internet Setup Test This test checks to see if your Internet access configuration is correct. When this option is chosen, your Prestige will call the ISP and perform the PPP negotiations. If everything is working properly, you will receive an appropriate response. Otherwise, note the error message and consult your network administrator. Ping Host This diagnostic sends an ICMP echo packet to the remote host and shows you the round-trip time when the Prestige gets a response. This is to test if the host is reachable via TCP/IP. Reboot System This option reboots the system. Command Mode This option allows you to enter the command mode. This mode allows you to diagnose and test your Prestige using a specified set of commands. Manual Call This option allows you to manually place a call to a remote node. The Prestige will show you traces of what is happening during the call setup and PPP negotiation. 10-10 Chapter 10 System Maintenance