ZyXEL P-100 User Guide - Page 65
you to Menu 11.3 - Remote node Network Layer Options. For more
View all ZyXEL P-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Prestige 100WH Internet Access Router Table 4-1. Remote Node Profile Menu Fields for Dial-up Line Applications (continued) Field Description Edit PPP Options To edit the PPP options for this remote node, move the cursor to this field, use the space bar to select [Yes] and press [Enter] . This will bring you to Menu 11.2 - remote node PPP Options. For more information on configuring PPP options, see the section Editing PPP Options. Rem IP Addr This is a required field. Enter the IP address of the remote gateway. Edit IP To edit the parameters, select [Yes] and press [Enter]. This will bring you to Menu 11.3 - Remote node Network Layer Options. For more information on this screen, refer to the Chapter 5 pertaining to the TCP/IP protocol. Edit Script Options To edit the parameters, select [Yes] and press [Enter]. This will bring you to Menu 11.4 - Remote node Script Options. See Section 3.7 Editing Script Options for details. Telco Options: Allocated Budget (min) This field sets a budget outgoing call time for the remote node. The default for this field is [0] for no budget control. Period (hr) This field sets the time interval to reset the above outgoing call budget control. Session Options: Input Filter Sets, Output Filter Sets and Call Filter Sets In these fields, select which filter set(s) you would like to apply to the incoming and outgoing traffic between this remote node and your Prestige. You can choose from 12 different filter sets. In addition, you can link up to 4 filter sets together for further customization (for example, 1, 5, 9, 12). The default is Blank. Note that spaces are accepted in this field. For more information on customizing your filter sets, see Chapter 7. The default is blank, that is, no filters defined. Chapter 4 Remote Node Configuration 4-5