ZyXEL P-100 User Guide - Page 70
Remote Node Setup
View all ZyXEL P-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Prestige 100WH Internet Access Router 5.1.1 Remote Node Setup Follow the procedure in Chapter 5 - Remote node Configuration for LAN-to-LAN to fill the protocol-independent parameters in Menu 11 - Remote Node Profile. For the protocoldependent parameters, follow the instructions below. If you are configuring your Prestige to receive an incoming call, you also need to set the default dial-in parameters in Menu 13. To edit Menu 11.3 - Remote Node Network Layer Options shown in Figure 5-2, follow these instructions: l In Menu 11.1 - Remote Node Profile, move the cursor to the [Edit IP] field, then press the space bar to toggle and set the value to [Yes], then press [Enter] to edit Menu 11.3 Network Layer Options. Figure 5-2. Menu 11.3- Remote Node Network Layer Options for TCP/IP Menu 11.3 - Remote Node Network Layer Options Rem IP Addr: 0.0.0.0 Rem Subnet Mask= 0.0.0.0 My WAN Addr= 0.0.0.0 Single User Account= No Server IP Addr= N/A Metric= 2 Private= No RIP Direction= Both Version= RIP-2B Enter here to CONFIRM or ESC to CANCEL: Applications 5-2 Chapter 5 Remote Node TCP/IP Configuration