ZyXEL P-100 User Guide - Page 40
Prestige 100WH WAN Port Setup
View all ZyXEL P-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Prestige 100WH Internet Access Router 2.9 Prestige 100WH WAN Port Setup This section describes how to configure the WAN port and the connected WAN device on your Prestige with Menu 2-WAN Port Setup. If advanced setup is required, go into Menu 2.1. When you are finished, press [Enter] in Menu 2.1 to save your configuration. 2.9.1 WAN Port Setup To configure the WAN Port on the Prestige, follow these steps: Step 1. Select option [2. WAN Port Setup] in the Main Menu by typing 2 at the menu selection number prompt. Step 2. This will bring up Menu 2 -WAN Port Setup, as shown in Figure 2-7. Menu 2.1 - WAN Port Setup Modem Name= ZyXEL Active= Yes Direction= Outgoing Phone Number= Port Speed= AT Command String Init= at&fs0=0w2s95=1 Advanced Setup= No Press ENTER to Confirm or ESC to Cancel: Figure 2-7. Menu 2.1 -WAN Port Setup 2-12 Chapter 2 Hardware Installation & Initial Setup