ZyXEL P-100 User Guide - Page 41
&f, Connect, S95=1
View all ZyXEL P-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Prestige 100WH Internet Access Router Table 2-5 describes how to configure the internal modem. Table 2-5. WAN Port Setup Menu Fields Field Description Modem Name Enter a descriptive name for the WAN device on the WAN Port. Active Set to [Yes] to activate the WAN port. Call Direction Set the call direction for the WAN device. Phone Number Enter the telephone number assigned to your line by your telephone company. Note that your Prestige only accepts digits; do not include dashes and spaces in this field. Port Speed Press the space bar to select the speed of the RS-232 link between Prestige and the WAN device. The speed should be close to 4 times the speed of the WAN device. For example, 230400. AT Command String: Init Enter the AT commands to initialize the WAN device at Prestige start up. The string is sent to the WAN device again whenever it is modified. For example, [at&fs0=0w2s95=1]. Advanced Setup To edit the Advanced Setup for this internal modem, move the cursor to this field, use the space bar to select [Yes] and press [Enter]. This will bring you to Menu 2.1.1 - Advanced WAN Setup. The default initialization string tells a modem to load factory default (&f), not to answer any incoming call (s0=0), and to report line speed (w2) and in "CONNECT speed" format (s95=1). If you have an ISDN TA, please consult its documentation. Chapter 2 Hardware Installation & Initial Setup 2-13