ZyXEL P-100 User Guide - Page 82
Table 6-2., Default Dial-in Setup Fields continued, Field, Description
View all ZyXEL P-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Prestige 100WH Internet Access Router Table 6-2. Default Dial-in Setup Fields (continued) Field Description Callback Budget This field sets the budget callback time for all the dial-in users. The Management: Allocated default for this field is [0] for unlimited budget. Budget (min) Callback Budget Management: Period (hr) This field sets the time interval to reset the above callback budget control. Dial-In IP Address Supplied By: Dial-in User If set to [Yes], it tells your Prestige to allow a remote host to specify its own IP address. If set to [No], the remote host must use the IP address assigned by your Prestige from the IP pool, configured below. This is to prevent the remote host from using an invalid IP address and potentially disrupting the whole network. Dial-In IP Address Supplied By: IP Pool This field tells your Prestige to provide the remote host with an IP address from the pool. This field is required if Dial-In IP Address Supplied By: Dial-in User is set to [No]. You can configure this field even if Dial-in User is set to [Yes], in which case your Prestige will accept the IP address if the remote peer specifies one; otherwise, an IP address is assigned from the pool. IP Pool: IP Start Addr This field is active only if you selected [Yes] in the Dial-In IP Address Supplied By: IP Pool field. The IP pool contains contiguous IP addresses and this field specifies the first one in the pool. 6-6 Chapter 6 Dial-in Server Applications