ZyXEL P-324 User Guide - Page 114

Prestige 324 User's Guide Figure 8-2 Static Route The following table describes the labels in this screen. Table 8-1 Static Route LABEL # Name Active Destination Gateway Edit DESCRIPTION Number of an individual static route. Name that describes or identifies this route. This field shows whether this static route is active (Yes) or not (No). This parameter specifies the IP network address of the final destination. Routing is always based on network number. This is the IP address of the gateway. The gateway is an immediate neighbor of your Prestige that will forward the packet to the destination. On the LAN, the gateway must be a router on the same segment as your Prestige; over the WAN, the gateway must be the IP address of one of the remote nodes. Select a static route index number and then click Edit to set up a static route on the Prestige. 8.2.1 Configuring Route Entry Select a static route index number and click Edit. The screen shown next appears. Fill in the required information for each static route. 8-2 Static Route Screens