ZyXEL P-324 User Guide - Page 296

Prestige 324 User's Guide Chapter 27 System Maintenance This chapter leads you through SMT menus 24.8 to 24.10. 27.1 Command Interpreter Mode The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 - System Maintenance. A list of valid commands can be found by typing help or ? at the command prompt. Type "exit" to return to the SMT main menu when finished. Menu 24 - System Maintenance 1. System Status 2. System Information and Console Port Speed 3. Log and Trace 4. Diagnostic 5. Backup Configuration 6. Restore Configuration 7. Firmware Update 8. Command Interpreter Mode 9. Call Control 10. Time and Date Setting 11. Remote Management Setup Enter Menu Selection Number: Figure 27-1 Command Mode in Menu 24 27.1.1 Command Syntax The command keywords are in courier new font. Enter the command keywords exactly as shown, do not abbreviate. The required fields in a command are enclosed in angle brackets . The optional fields in a command are enclosed in square brackets []. System Maintenance 27-1