ZyXEL P-324 User Guide - Page 194
Table 16-6 Menu 11.3: Remote Node Network Layer Options
View all ZyXEL P-324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Prestige 324 User's Guide Table 16-6 Menu 11.3: Remote Node Network Layer Options FIELD DESCRIPTION EXAMPLE Network Address Translation Network Address Translation (NAT) allows the translation of an Internet protocol address used within one network (for example a private IP address used in a local network) to a different IP address known within another network (for example a public IP address used on the Internet). None (default) Press [SPACE BAR] and then [ENTER] to select either Full Feature, None or SUA Only. Choose None to disable NAT. Choose SUA Only if you have a single public IP address. SUA (Single User Account) is a subset of NAT that supports two types of mapping: Many-to-One and Server. Choose Full Feature if you have multiple public IP addresses. Full Feature mapping types include: One-to-One, Many-to-One (SUA/PAT), Many-to-Many Overload, Many- One-to-One and Server. When you select Full Feature you must configure at least one address mapping set! See the Network Address Translation (NAT) chapter for a full discussion on this feature. Metric Enter a number from 1 to 15 to set this route's priority among the Prestige's routes. The smaller the number, the higher priority the route has. 15 (default) Private This parameter determines if the Prestige will include the route to this remote node in its RIP broadcasts. If set to Yes, this route is kept private and not included in RIP broadcasts. If No, the route to this remote node will be propagated to other hosts through RIP broadcasts. No (default) RIP Direction Press [SPACE BAR] and then [ENTER] to select the RIP Direction from Both/ None/In Only/Out Only and None. Both (default) Version Press [SPACE BAR] and then [ENTER] to select the RIP version from RIP1/RIP-2B/RIP-2M. RIP-1 Multicast IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish membership in a Multicast group. The Prestige supports both IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2). Press the [SPACE BAR] to enable IP Multicasting or select None to disable it. See the LAN Setup chapter for more information on this feature. None (default) Once you have completed filling in Menu 11.3 Remote Node Network Layer Options, press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration and return to menu 11, or press [ESC] at any time to cancel. 16-10 Menu 2 WAN Setup