ZyXEL P-324 User Guide - Page 213
Table 19-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation
View all ZyXEL P-324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Prestige 324 User's Guide Table 19-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation FIELD DESCRIPTION EXAMPLE My Password Enter the password assigned by your ISP when the Prestige calls this ***** remote node. Valid for PPPoE encapsulation only. Retype to Type your password again to make sure that you have entered it ***** Confirm correctly. Server This field is valid only when RoadRunner is selected in the Service Type field. The Prestige will find the RoadRunner Server IP automatically if this field is left blank. If it does not, then you must enter the authentication server IP address here. Relogin Every This field is available when you select Telia Login in the Service Type (min) field. The Telia server logs the Prestige out if the Prestige does not log in periodically. Type the number of minutes from 1 to 59 (30 recommended) for the Prestige to wait between logins. Route This field refers to the protocol that will be routed by your Prestige - IP IP is the only option for the Prestige. Edit IP This field leads to a "hidden" menu. Press [SPACE BAR] to select Yes and press [ENTER] to go to Menu 11.3 - Remote Node Network Layer Options. No (default) Session Options Edit Filter Sets This field leads to another "hidden" menu. Use [SPACE BAR] to select Yes and press [ENTER] to open menu 11.5 to edit the filter sets. See the Remote Node Filter section for more details. No (default) Edit Traffic Redirect Press [SPACE BAR] to select Yes or No. Select Yes and press [ENTER] to configure Menu 11.6 Traffic Redirect Setup. Select No (default) if you do not want to configure this feature. Once you have configured this menu, press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press [ESC] at any time to cancel. Remote Node Configuration 19-3