ZyXEL P-324 User Guide - Page 89

Prestige 324 User's Guide Table 6-9 Dial Backup Setup LABEL DESCRIPTION Get IP Address Type the login name assigned by your ISP for this remote node. Automatically from Remote Server Used Fixed IP Select this check box if your ISP assigned you a fixed IP address, then enter the Address IP address in the following field. My WAN IP Address Leave the field set to 0.0.0.0 (default) to have the ISP or other remote router dynamically (automatically) assign your WAN IP address if you do not know it. Type your WAN IP address here if you know it (static). This is the address assigned to your local Prestige, not the remote router. Remote Node IP Leave this field set to 0.0.0.0 (default) to have the ISP or other remote router Address dynamically (automatically) send its IP address if you do not know it. Type the remote gateway's IP address here if you know it (static). Remote IP Subnet Leave this field set to 0.0.0.0 (default) to have the ISP or other remote router Mask dynamically send its subnet mask if you do not know it. Type the remote gateway's subnet mask here if you know it (static). Enable SUA Network Address Translation (NAT) allows the translation of an Internet protocol address used within one network to a different IP address known within another network. SUA (Single User Account) is a subset of NAT that supports two types of mapping: Many-to-One and Server. When you select this option the Prestige will use Address Mapping Set 255 in the SMT (see the section on menu 15.1 for more information). Select the check box to enable SUA. Clear the check box to disable SUA so the Prestige does not perform any NAT mapping for the dial backup connection. Enable RIP Select this check box to turn on RIP (Routing Information Protocol), which allows a router to exchange routing information with other routers. WAN Screens 6-19