ZyXEL P-324 User Guide - Page 186

Prestige 324 User's Guide Table 16-1 MAC Address Cloning in WAN Setup FIELD DESCRIPTION EXAMPLE IP Address This field is applicable only if you choose the IP address attached on LAN method in the Assigned By field. Enter the IP address of the computer on the LAN whose MAC you are cloning. 192.168.1.35 When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save your configuration, or press [ESC] at any time to cancel. 16.2 Dial Backup The Dial Backup port can be used in reserve, as a traditional dial-up connection should the broadband connection to the WAN port fail. To set up the auxiliary port (Dial Backup) for use in the event that the regular WAN connection is dropped, first make sure you have set up the switch and port connection (see the Quick Start Guide), then configure 1. Menu 2 - WAN Setup, 2. Menu 2.1 - Advanced WAN Setup and 3. Menu 11.1 - Remote Node Profile (Backup ISP) as shown next Refer also to the traffic redirect section for information on an alternate backup WAN connection. 16.3 Configuring Dial Backup in Menu 2 From the main menu, enter 2 to open menu 2. Menu 2 - WAN Setup MAC Address: Assigned By= Factory default IP Address= N/A Dial-Backup: Active= No Phone Number= Port Speed= 9600 AT Command String: Init= Edit Advanced Setup= No Press ENTER to Confirm or ESC to Cancel: Figure 16-2 Menu 2: Dial Backup Setup 16-2 Menu 2 WAN Setup