ZyXEL P-324 User Guide - Page 200

Prestige 324 User's Guide 17.2 Protocol Dependent Ethernet Setup Depending on the protocols for your applications, you need to configure the respective Ethernet Setup, as outlined below. For TCP/IP Ethernet setup refer to the Internet Access Application chapter. For bridging Ethernet setup refer to the Bridging Setup chapter. 17.3 TCP/IP Ethernet Setup and DHCP Use menu 3.2 to configure your Prestige for TCP/IP. To edit menu 3.2, enter 3 from the main menu to display Menu 3 - LAN Setup. When menu 3 appears, press 2 and press [ENTER] to display Menu 3.2 - TCP/IP and DHCP Ethernet Setup, as shown next: First address in the IP pool Size of the IP Pool Menu 3.2 - TCP/IP and DHCP Ethernet Setup DHCP= Server TCP/IP Setup: Client IP Pool: Starting Address= 192.168.1.33 Size of Client IP Pool= 32 First DNS Server= From ISP IP Address= 192.168.1.1 IP Subnet Mask= 255.255.255.0 RIP Direction= Both This is the IP address of the Prestige IP Address= N/A Version= RIP-1 Second DNS Server= From ISP Multicast= None IP Address= N/A Edit IP Alias= No Third DNS Server= DNS Relay IP Address= N/A DHCP Server Address= N/A IP addresses of Press ENTER to Confirm or ESC to Cancel: the DNS servers Figure 17-3 Menu 3.2 TCP/IP and DHCP Ethernet Setup Follow the instructions in the next table on how to configure the DHCP fields. Table 17-1 Menu 3.2: DHCP Ethernet Setup Fields FIELD DHCP DESCRIPTION This field enables/disables the DHCP server. If set to Server, your Prestige will act as a DHCP server. If set to None, the DHCP server will be disabled. If set to Relay, the Prestige acts as a surrogate DHCP server and relays requests and responses between the remote server and the clients. When set to Server, the following items need to be set: EXAMPLE Server 17-2 Menu 3 LAN Setup