ZyXEL P-324 User Guide - Page 142

Prestige 324 User's Guide 11.1.1 Remote Management Limitations Remote management over LAN or WAN will not work when: 1. A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web service. 2. You have disabled that service in one of the remote management screens. 3. The IP address in the Secured Client IP field does not match the client IP address. If it does not match, the Prestige will disconnect the session immediately. 4. There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time. 5. There is a firewall rule that blocks it. 11.1.2 Remote Management and NAT When NAT is enabled: Use the Prestige's WAN IP address when configuring from the WAN. Use the Prestige's LAN IP address when configuring from the LAN. 11.1.3 System Timeout There is a default system management idle timeout of five minutes (three hundred seconds). The Prestige automatically logs you out if the management session remains idle for longer than this timeout period. The management session does not time out when a statistics screen is polling. You can change the timeout period in the System screen 11.2 Configuring WWW To change your Prestige's World Wide Web settings, click REMOTE MGMT to display the WWW screen. 11-2 Remote Management Screens