ZyXEL P-324 User Guide - Page 234

Prestige 324 User's Guide Menu 15.1.1.1 Address Mapping Rule Type= One-to-One Local IP: Start= 0.0.0.0 End = N/A Global IP: Start= 0.0.0.0 End = N/A Press ENTER to Confirm or ESC to Cancel: Figure 21-7 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set The following table explains the fields in this menu. Table 21-4 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set FIELD DESCRIPTION EXAMPLE Type Press [SPACE BAR] and then [ENTER] to select from a total of five types. These are the mapping types discussed in the chapter on NAT web configurator screens. Server allows you to specify multiple servers of different types behind NAT to this computer. See section 21.5.3 for an example. One-to-One Local IP Only local IP fields are N/A for server; Global IP fields MUST be set for Server. Start This is the starting local IP address (ILA). 0.0.0.0 End This is the ending local IP address (ILA). If the rule is for all local IPs, then N/A put the Start IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is N/A for One-to-One and Server types. Global IP Start This is the starting inside global IP address (IGA). If you have a dynamic IP, enter 0.0.0.0 as the Global IP Start. Note that Global IP Start can be set to 0.0.0.0 only if the types are Many-to-One or Server. 0.0.0.0 End This is the ending inside global IP address (IGA). This field is N/A for One- N/A to-One, Many-to-One and Server types. When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen. 21-8 NAT