ZyXEL P-324 User Guide - Page 216

Prestige 324 User's Guide 19.2.3 PPTP Encapsulation If you change the Encapsulation to PPTP in menu 11.1, then you will see the next screen. Please see the appendix for information on PPTP. Menu 11.1 - Remote Node Profile Rem Node Name= MyISP Active= Yes Route= IP Encapsulation= PPTP Service Type= Standard Service Name= N/A Outgoing: My Login= My Password= ******** Retype to Confirm= ******** Authen= CHAP/PAP PPTP: My IP Addr= My IP Mask= Server IP Addr= Connection ID/Name= Edit IP= No Telco Option: Allocated Budget(min)= 0 Period(hr)= 0 Schedules= Nailed-Up Connection= No Session Options: Edit Filter Sets= No Idle Timeout(sec)= 100 Edit Traffic Redirect= No Press ENTER to Confirm or ESC to Cancel: Figure 19-3 Menu 11.1 Remote Node Profile for PPTP Encapsulation The next table shows how to configure fields in menu 11.1 not previously discussed. Table 19-3 Menu 11.1 Remote Node Profile for PPTP Encapsulation FIELD DESCRIPTION Encapsulation Press [SPACE BAR] and then [ENTER] to select PPTP. You must also go to menu 11.3 to check the IP Address setting once you have selected the encapsulation method. My IP Addr Enter the IP address of the WAN Ethernet port. My IP Mask Enter the subnet mask of the WAN Ethernet port. Server IP Addr Enter the IP address of the ANT modem. Connection Enter the connection ID or connection name in the ANT. It must ID/Name follow the "c:id" and "n:name" format. This field is optional and depends on the requirements of your DSL modem. EXAMPLE PPTP 10.0.0.140 255.255.255.0 10.0.0.138 N:My ISP 19-6 Remote Node Configuration