Benelli SuperSport User Guide - Page 49
Attenzione, Attention, Achtung
View all Benelli SuperSport manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
48 9) Avvitare il cappellotto di fissaggio, completo di molla, sull'estremità del tubo serbatoio, serrandolo a fondo per bloccare perfettamente canna e astina contro la carcassa (figg. 13-14). ATTENZIONE: prima di bloccare canna ed astina contro la carcassa, accertarsi sempre che la molla del cappellotto di fissaggio sia inserita nel cappellotto stesso (fig. 13): la mancanza della molla non consente un regolare bloccaggio della canna, con conseguenti danni all'arma. 10) Chiudere l'otturatore, premendo il bottone di comando elevatore (fig. 15). 9) Screw the fore-end cap and its spring on the magazine tube end, then tighten them firmly until the barrel and the fore-end are perfectly locked to the receiver (figs. 13-14). NOTE: always make sure that the cap spring is inserted in the cap itself (fig. 13) before locking the barrel and foreend to the receiver: a missing spring will not allow proper locking of the barrel, causing serious damage to the shotgun. 10) Close the bolt by pressing the special carrier control button (fig. 15). 9) Visser le capuchon de fixation avec son ressort sur l'extrémité du tube magasin, en serrant à fond pour immobiliser parfaitement le canon et le devant contre la carcasse (figs. 13-14). ATTENTION: avant de bloquer le canon et le devant contre la carcasse, toujours s'assurer que le ressort du capuchon de fixation est introduit dans le capuchon (fig. 13): l'absence du ressort ne permet pas un blocage régulier du canon, sous risque d'endommager l'arme. 10) Fermer l'obturateur en poussant le bouton de commande élévateur (fig. 15). 9) Die Befestigungskappe mit der Feder auf das vordere Ende des Magazinrohres aufsetzen und so festschrauben, dass eine einwandfreie Verbindung des Laufes und des Vorderschafts mit dem Verschlussgehäuse gewährleistet ist (Abb. 13-14). ACHTUNG: Vor der Befestigung des Laufes und des Vorderschafts am Gehäuse muss stets sichergestellt werden, dass sich die Feder in der Befestigungskappe befindet (Abb. 13). Beim Fehlen dieser Feder kann der Lauf nicht ordnungsgemäß befestigt werden, was zur Beschädigung der Waffe führen kann. 10) Den Verschluss durch Drücken auf den Verschlussfangknopf verschließen (Abb. 15). 13 14