Brother International HL-3075CW Network Users Manual - English - Page 24
Uncon d, STATIC, Boot Method, IP Address, Subnet Mask, Gateway, Windows, Macintosh
View all Brother International HL-3075CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
c Double-click the unconfigured device. Windows® Configuring your machine for a network Macintosh 2 Note • If the print server is set to its factory default settings (if you don't use a DHCP/BOOTP/RARP server), the device will appear as Unconfigured in the BRAdmin Light utility screen. • You can find the node name and MAC Address (Ethernet Address) by printing out the Network Configuration page. See Printing the Network Configuration page on page 60. d Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of your print server. Windows® Macintosh e Click OK. f With the correctly programmed IP address, you will see the Brother print server in the device list. 14
Configuring your machine for a network
14
2
c
Double-click the unconfigured device.
Note
•
If the print server is set to its factory default settings (if you don’t use a DHCP/BOOTP/RARP server), the
device will appear as
Unconfigured
in the BRAdmin Light utility screen.
•
You can find the node name and MAC Address (Ethernet Address) by printing out the Network
Configuration page.
See
Printing the Network Configuration page
on page 60.
d
Choose
STATIC
from
Boot Method
. Enter the
IP Address
,
Subnet Mask
and
Gateway
(if needed) of
your print server.
e
Click
OK
.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.
Windows
®
Macintosh
Windows
®
Macintosh