Canon 3323B001 Installation Guide - Page 181

eCopy ShareScan® Installation and Setup Guide | 173 Network infrastructure worksheet Multiple domains and multiple workgroups are supported only if the Services Manager and all eCopy-enabled devices are configured to communicate with one other via TCP or UDP, without any port filtering or blocking. Depending on the topology of the network, degradation in performance can occur when devices span multiple domains. ShareScan supports child domains provided that the devices and the Services Manager can communicate using an IP address. When devices cross domains, the system checks to see whether the device can resolve the IP address by name. If it cannot resolve the address, the device communicates using the IP address of the Services Manager. TABLE 56. Network infrastructure worksheet Item Notes Network Workgroup or domain-based network? Devices span single eCopy recommends a single domain for or multiple domains? best performance. Devices span single or multiple workgroups? eCopy recommends a single workgroup for best performance. Microsoft Active Directory installed? Required on domain-based networks to support remote access to the Services Manager. Devices on different subnets or VLANs? eCopy-enabled devices and the Services Manager can be on different subnets or virtual LANs (VLANs), provided that the devices can communicate with the Services Manager using an IP address. Router configured to pass packets between subnets or VLANs? Required when devices span multiple subnets or VLANs. Example Domain Single domain Not applicable Yes Yes Yes