Canon 3323B001 Installation Guide - Page 35
Web administration, To manage the ScanFront device remotely
UPC - 013803103397
View all Canon 3323B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
eCopy ShareScan® Installation and Setup Guide | 27 Web administration After setting up the device, you can administer the ScanFront device from any Web browser or from the Web browser accessed from the Manage node in the ShareScan Administration console. To manage the ScanFront device remotely: 1 Access a Web browser using either of the following methods: ■ Open any Web browser and then enter the IP address of the Canon ScanFront device, using the following format: http:// ■ In the ShareScan Administration console, select Devices > Manage. A Web browser opens in the right pane. 2 In the upper right corner, select the language that you want to use: English, French, Italian, German, or Spanish. Note: While the ShareScan Administration console enables you to select languages in addition to French, Italian, German, and Spanish for the hard keyboard and the on-screen keyboard, the Web administration component only supports French, Italian, German, and Spanish. In addition, the Web administration component does not support auto-completion or special keys. 3 Enter the administrator's password, and then select Login. The Web administration page appears. 4 Update the configuration settings (see Table 1). TABLE 1. Remote administration functions Configuration tool Description Password Enables you to modify the administrator's password. After modifying the password, select Save. Network Enables you to update the device's network settings, which are used to connect the device to a network. After modifying the network settings, select Save. ShareScan Address Enables you to associate the device with the PC running the ShareScan Services Manager, which is called the ShareScan Host. Use https enables you to encrypt passwords and is selected by default. This automatically sets the port to 443. eCopy recommends these settings. If you do not select Use https, the port is automatically set to 8080 and password encryption is not enabled. After modifying the IP address, select Connect.