Canon 3323B001 Installation Guide - Page 34
Setting up the Canon ScanFront device, To set up the device
UPC - 013803103397
View all Canon 3323B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
26 | Quick Start: Installing and setting up ShareScan Setting up the Canon ScanFront device Setting up this device involves specifying a password for the device and then associating the device with the PC running the ShareScan Services Manager, which is called the ShareScan Host. To set up the device: 1 Power on the device. The calibration screen appears. 2 Follow the on-screen instructions to calibrate the device screen. When calibration is complete, the Password page appears. 3 Specify a password for the device and then select Next. A password is not required. If you do not want to set a password, leave the password field empty and then select Next. The Network page appears. This page enables you to connect the device to a network. 4 Specify the device's network settings and then select Save. Note: You must specify a valid device name, IP address (static address only), subnet mask, and default gateway. If you do not have this information, see your network administrator. 5 When prompted, restart the device. 6 Enter the password and then select Next. The ShareScan Address page appears. 7 Enter the IP address of the PC where you installed ShareScan. (Do not enter the IP address of the ScanFront device.) You can find the IP address of the Services Manager PC in the Administration console, immediately under the ShareScan node. For example, the IP address in the following sample screen is "10.10.14.217". 8 Click Connect. The ShareScan Client application appears, indicating that you can now add the device to the ShareScan Services Manager (see page 29).