Canon PIXMA MP530 User's Guide - Page 77

1 Connect a telephone to your machine if you want to talk to the recipient before sending a document. 2 Load the document in the ADF. Note For details on how to load documents, see "Loading Documents" on page 19. 3 Press [FAX]. 4 Adjust the settings for your document as necessary. Note z To select the image quality (fax resolution), see "Adjusting the Image Quality (Fax Resolution)" on page 72. z To select the scan contrast, see "Adjusting the Scan Contrast" on page 73. 5 You can lift the handset if an answering machine is connected to the machine. 6 Dial the recipient's number using the numeric buttons or coded speed dialing. Note For details on how to use coded speed dialing, see "How to Use Coded Speed Dialing" on page 75. 7 Talk through the handset to the recipient. If you hear a high-pitched signal instead of the recipient's voice, go to step 9. 8 Ask the recipient to set recipient's fax machine to receive faxes. 9 When you hear a high-pitched signal, press [Color] for color sending, or [Black] for black & white sending. Then hang up the handset. Important Color sending is available only when the recipient's fax machine supports color faxing. Note To cancel manual sending, press [Stop/Reset]. z Sending Faxes from Your Computer With your machine connected to your computer, you can send faxes from the computer. For details, refer to the FAX Driver Guide. „ How to Use Coded Speed Dialing Pre-registering fax numbers in coded speed dials enables you to dial them by just pressing [Coded Dial] and entering a two-digit code. 1 Press [Coded Dial]. Chapter 4 Faxing 75