Canon PIXMA MP530 User's Guide - Page 85

FAX ONLY MODE: MANUAL MODE: ANS.MACHINE MODE: FAX/TEL AUTO SW: DRPD: NETWORK SWITCH: See "If You Want to Receive Only Faxes Automatically with Your Machine, or You Have a Dedicated Telephone Line for Fax Use Only:" on page 80. See "If You Receive Mainly Voice Calls and Sometimes Faxes, or You Want to Receive Faxes Manually:" on page 80. See "If You Want to Receive Voice Messages on Your Answering Machine and Receive Faxes Automatically:" on page 81. See "If You Want to Receive Faxes Automatically as well as Voice Calls:" on page 81. See "If You Have Subscribed to a Distinctive Ring Pattern Detection (DRPD) Service with Your Telephone Company (US and Canada only):" on page 82. See "If You Want Your Machine to Automatically Switch between Fax and Voice Calls by the Call Ring Patterns (Network Switch) (This setting is not available in some countries and regions.):" on page 82. 4 Press [OK]. The receive mode will be displayed on the bottom left of the LCD. 02/15/2006 WED 06:11 FAX/TEL STANDARD (A) (A) Receive mode Note For details on the receive modes, see "Receive Modes" on page 80. „ Canceling Receiving Press [Stop/Reset] and follow any instructions on the LCD. „ Memory Receiving If ink has run out while receiving a fax, if ink level is low, if the setting is incorrect, or if the setting is other than , the fax is automatically stored in memory and is displayed. When the ink tank is replaced or the paper size setting is corrected, the stored fax is printed automatically. Note z The machine can store up to approximately 150 pages* of faxes in memory. z If the memory becomes full, the machine cannot receive the remaining faxes. Print or delete the documents stored in memory (see "Printing or Deleting a Document in Memory" on page 77), and then contact the sender and have him/her resend them. * When using ITU-T No.1 chart (Standard mode) Chapter 4 Faxing 83