Canon VIXIA HF20 VIXIA HF20 / HF200 Manual - Page 158
Messages Related to the Optional DW-100 DVD Burner
View all Canon VIXIA HF20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
This scene was recorded using another device and cannot be added to the playlist. - Scenes that were not recorded with this camcorder cannot be added to the playlist. This scene was recorded using another device and cannot be copied. - Scenes that were not recorded with this camcorder cannot be copied to the memory card. Too many photos. Disconnect the USB cable. - Disconnect the USB cable. Try using a memory card reader or decrease the number of photos on the memory card to fewer than 2,500 photos. - If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and restore the connection after a short while. Transfer order error - You attempted to set more than 998 transfer orders. Reduce the number of photos marked with transfer orders. Unable to recognize the data - You transferred data to the camcorder recorded in a different television system (PAL or SECAM). Unable to recover data - Could not recover a corrupted file. Messages Related to the Optional DW-100 DVD Burner If an error message appears while the camcorder is connected to the optional DW-100 DVD Burner, refer to the following section and also to the instruction manual of the DVD Burner. Cannot read the disc. Check the disc. - During disc recording mode, this message can appear when a commercially available DVD disc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted. - During disc playback mode, this message can appear when a commercially available DVD disc or a brand new DVD disc is inserted. Close the memory card slot cover - The memory card slot cover is open. Close the cover after correctly inserting the memory card ( 42). Connect the compact power adapter - The camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder. Disc access failure. Check the disc. - There was an error when reading the disc or attempting to write onto it. - This message can appear also if condensation has formed ( 167). Wait until the DVD burner dries completely before resuming use. - The disc may not be loaded correctly. Try removing the disc and reinserting it. 158 Additional Information