Cisco WS-C3560E-48PD-SF Hardware Installation Guide - Page 71
Magnet Mounting
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 3 Switch Installation (8- and 12-Port Switches) Installing the Switch Magnet Mounting Warning Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system. Statement 378 Caution Do not wall-mount the switch with its front panel facing up or sideways. According to safety regulations, magnet-mount the switch with its front panel facing down to improve airflow and to provide easier access to the cables. Step 1 Place one side of the magnet against the bottom of the switch, as shown in Figure 3-7. Figure 3-7 Mounting the Switch with a Magnet 1 2 250605 3 1 Metal mounting surface 3 Switch front panel 2 Mounting magnet Step 2 Mount the magnet and switch on a vertical metal surface. After the switch is attached to the mounting magnet: 1. (Optional) Secure the AC power cord. See "Securing the AC Power Cord" section on page 3-19. 2. Power on the switch. See the "Verifying Switch Operation" section on page 3-7. OL-6337-07 Catalyst 3560 Switch Hardware Installation Guide 3-15