Cisco WS-C3560E-48PD-SF Hardware Installation Guide - Page 75
Securing the AC Power Cord, Insert the Power-Cord Retainer, Attach the Power-Cord Bushing
View all Cisco WS-C3560E-48PD-SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter 3 Switch Installation (8- and 12-Port Switches) Installing the Switch Securing the AC Power Cord The AC power-cord retainer is an optional part (PWR-CLIP-CMP). Step 1 Insert the power-cord retainer wire into the slot on the plastic holder. Step 2 Attach the plastic holder onto the switch rear panel with the supplied screw (see Figure 3-11). Figure 3-11 Insert the Power-Cord Retainer 250519 Step 3 Rotate the wire to the right side of the AC power cord connector, and insert the AC power cord (see Figure 3-12). Figure 3-12 Insert the AC Power Cord 250520 Step 4 Place the power cord bushing on the power cord with the opening at the top. The retainer wire only fits into one slot on the bushing. Move the retainer wire into the bushing slot (see Figure 3-13). Figure 3-13 Attach the Power-Cord Bushing 250521 Step 5 Slide the bushing so that it rests against the power-cord connector, and then rotate the bushing clockwise until the bushing is securely fastened and its opening is on the right side of the power cord (see Figure 3-14). OL-6337-07 Catalyst 3560 Switch Hardware Installation Guide 3-19