Dell Vostro 200 Owner's Manual - Page 132
CAUTION, NOTICE, Follow the procedures in Before You Begin
View all Dell Vostro 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
11 Connect your computer and devices to electrical outlets, and then turn them on. 12 See the documentation that came with the drive for instructions on installing any software required for drive operation. 13 Check the system setup for drive configuration changes (see "Entering System Setup" on page 174). Installing a Second Hard Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently cushion it. NOTE: For additional drives, extra screws are not shipped during initial purchase of the computer, but are shipped with the additional drives. 1 Follow the procedures in "Before You Begin" on page 101. 2 Remove the computer cover (see "Removing the Computer Cover" on page 103). 3 Check the documentation for the drive to verify that it is configured for your computer. 4 Slide the second hard drive into the second hard drive bay. 5 Align the screw holes in the second hard drive with the screw holes in the second hard drive bay. 132 Removing and Installing Parts