Dell Vostro 200 Owner's Manual - Page 180
Clearing Forgotten Passwords
View all Dell Vostro 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Changing Boot Sequence for Future Boots 1 Enter system setup (see "Entering System Setup" on page 174). 2 Use the arrow keys to highlight the Boot Sequence menu option and press to access the menu. NOTE: Write down your current boot sequence in case you want to restore it. 3 Press the up- and down-arrow keys to move through the list of devices. 4 Press the spacebar to enable or disable a device (enabled devices have a checkmark). 5 Press plus (+) or minus (-) to move a selected device up or down the list. Clearing Forgotten Passwords CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. 1 Follow the procedures in "Before You Begin" on page 101. 2 Remove the computer cover (see "Removing the Computer Cover" on page 103). 3 Locate the 3-pin password connector (PSWD) on the system board. 4 Remove the 2-pin jumper plug from pins 2 and 3 and fix it on pins 1 and 2. 180 Appendix