Dell Vostro 200 Owner's Manual - Page 166
Replacing the Computer Cover
View all Dell Vostro 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
3 Replace the cables that you removed from the system board. 4 Replace the processor and the heat sink assembly (see "Installing the Processor" on page 159). NOTICE: Ensure that the heat sink assembly is correctly seated and secure. 5 Replace the memory modules into the memory sockets at the same locations from which you removed them (see "Memory" on page 111). 6 Replace any add-in cards on the system board. 7 Replace the computer cover (see "Replacing the Computer Cover" on page 166). 8 Connect your computer and devices to an electrical outlet, and turn them on. 9 Verify that the computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 86). Replacing the Computer Cover CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. 1 Ensure that all cables are connected, and fold cables out of the way. 2 Ensure that no tools or extra parts are left inside the computer. 3 Align the tabs at the bottom of the computer cover with the slots located along the edge of the computer. 4 Press the computer cover down and slide it towards the front of the computer until you feel a click or feel the computer cover securely installed. 5 Ensure that the cover is seated correctly. 6 Replace and tighten the two screws that secure the computer cover. 166 Removing and Installing Parts