Dell Vostro 200 Owner's Manual - Page 134
Floppy Drive
View all Dell Vostro 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer. 11 Connect your computer and devices to electrical outlets, and then turn them on. 12 See the documentation that came with the drive for instructions on installing any software required for drive operation. 13 Check the system setup for drive configuration changes (see "Entering System Setup" on page 174). Floppy Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. NOTE: If you are adding a floppy drive, see "Installing a Floppy Drive" on page 136. Removing a Floppy Drive 1 Follow the procedures in "Before You Begin" on page 101. 2 Remove the computer cover (see "Removing the Computer Cover" on page 103). 3 Remove the bezel (see "Removing the Bezel" on page 123). 134 Removing and Installing Parts