Dell Vostro 200 Owner's Manual - Page 154
Removing the I/O Panel, Disconnect all the cables that are connected to the I/O panel from
View all Dell Vostro 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Removing the I/O Panel NOTE: Note the routing of all cables as you remove them so that you can re-route them correctly when installing the new I/O panel. 1 Follow the procedures in "Before You Begin" on page 101. 2 Remove the computer cover (see "Removing the Computer Cover" on page 103). 3 Remove the bezel (see "Removing the Bezel" on page 123). NOTICE: When sliding the I/O panel out of the computer, be extremely careful. Carelessness may result in damage to the cable connectors and the cable routing clips. 4 Disconnect all the cables that are connected to the I/O panel from the system board. 5 Remove the screw that secures the I/O panel. 6 Carefully remove the I/O panel from the computer. 1 2 3 1 I/O panel clamp 4 cables 45 2 I/O panel 5 I/O panel clamp slot 3 screw 154 Removing and Installing Parts