Dell Vostro 200 Owner's Manual - Page 135
see Removing a PCI/PCI Express Card, Disconnect the data cable from the system board.
View all Dell Vostro 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
5 1 2 3 4 1 floppy drive 4 system board connector 2 data cable 5 screws (2) 3 power cable 4 Disconnect the power and data cables from the back of the floppy drive. NOTE: If you have installed a PCI Express x16 card, this card may cover the floppy drive connectors. Remove this card before disconnecting the floppy-drive cables (see "Removing a PCI/PCI Express Card" on page 121). 5 Disconnect the data cable from the system board. 6 Remove the two screws securing the floppy drive. 7 Slide the floppy drive out through the front of the computer. Removing and Installing Parts 135
Removing and Installing Parts
135
4
Disconnect the power and data cables from the back of the floppy drive.
NOTE:
If you have installed a PCI Express x16 card, this card may cover the floppy
drive connectors. Remove this card before disconnecting the floppy-drive cables
(see "Removing a PCI/PCI Express Card
" on page 121
).
5
Disconnect the data cable from the system board.
6
Remove the two screws securing the floppy drive.
7
Slide the floppy drive out through the front of the computer.
1
floppy drive
2
data cable
3
power cable
4
system board
connector
5
screws (2)
2
4
3
1
5