Epson LQ-2550 User Manual - Page 152
Cut Sheet Feeder Does Not Load Paper Correctly, The Short Tear-Off Feature Does Not Work Properly
View all Epson LQ-2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
l The paper guide may not be installed properly. See Chapter 2. l The paper supply may be too far from the printer or not aligned with the tractor. See Chapter 2 for instructions. l Be sure that the cable cover is properly installed. See Chapter 2. Cut sheet feeder does not load paper correctly l Be sure PAPER SELECT is set to CSF. l The cut sheet feeder may not be installed properly. l The paper supply may not be loaded properly. Only 150 sheets may be loaded; remove any extra. l The paper may not be correct for proper operation. l Remove any paper jam. l The paper set lever of the cut sheet feeder may not be pushed back. l The paper length may not be set correctly. See Chapter 7 for more information on cut sheet feeder operation. The short tear-off feature does not work properly l Be sure Auto Tear Off is set to on in SelecType or press the TEAR OFF button. l Be sure that all the data in the buffer has been printed and that a command has been sent to feed the paper to the top of the next page. You may have to send a form feed. Color printing is not what you expect l See that your software is properly installed for color printing on the LQ-2550. l If your application program allows you to insert control codes, see page 8-27 for the commands for color. l You can also choose the color with SelecType. See Chapter 3. Troubleshooting 6-5