HP 450c HP DesignJet 430/450C/488CA Printer - UserÂ’s Guide - Page 107
Test Print again.
View all HP 450c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Special internal prints Using the Print Quality Test Print If the line is not perfectly straight at bias 0 in the test image (see figure above), try the following: 1 Perform the Black Cartridge Alignment Procedure (see page 5-4) and print the Print Quality Test Print again to see if there has been any improvement. 2 If the error is still present, replace the failing cartridge and print the Print Quality Test Print again. Test 4 (Color Alignment Quality) is in two parts: The first of the patterns (in the upper line) tests alignment between the cyan and magenta cartridges; it should be blue with no cyan or magenta shadows. The second tests alignment between the cyan and yellow cartridges; it should be green with no cyan or yellow shadows. The third tests alignment between the magenta and yellow cartridges; it should be red, with no magenta or yellow shadows. INTERNAL 5 PRINTS Correct Incorrect The lower test patterns check the color alignment; there are six patterns each with two different primary colors. If there is misalignment between the primary Correct Incorrect 5-15