HP 450c HP DesignJet 430/450C/488CA Printer - UserÂ’s Guide - Page 157
HP-GL 7586B, HP-GL/2, HP RTL, PJL
View all HP 450c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Reference Printer specifications Functional specifications (continued) Supported media sizes Width (carriage axis) Minimum Maximum Length (paper axis) Minimum Maximum 210 mm (8.3 in) E/A0-size printer: 210 mm (8.3 in) 917 mm (36.1 in) Sheet: 1.625 m (64 in) D/A1-size printer: 625 mm (24.6 in) Maximum length of long-axis print on roll media: 15.2 m (50 ft) Margins Leading edge: 17 mm (0.67 in) For printing area (media size minus margins), see page 10-7 Trailing edge: 17 mm (0.67 in) Sides: 5 mm (0.2 in) All measurements 2 mm (0.08 in). Resolution 1 On Setup Sheet, if Color/Mono is set to: Print color as grayscale Fast print quality: 150 x 300 dpi. Other print qualities: 600 x 600 dpi.2 Print color as color 450C/488CA All print qualities: 300 x 300 dpi. Accuracy 0.38 mm (0.015 in) or 0.2% of the specified vector length, whichever is greater, (maximum at 23_C (73_F), 50-60% relative humidity, on HP Matte Film. accumulated error) Programming languages supported HP-GL (7586B), HP-GL/2, HP RTL, PJL 1 The 600 dpi resolution specified is addressable resolution, that is, it refers to the smallest movement the print head can make between dots rather than to the size of the dot. 2 Except for glossy media types, on which the resolution is always 300 dpi. REFERENCE 10 10-3