HP 450c HP DesignJet 430/450C/488CA Printer - UserÂ’s Guide - Page 42

Setting up your printer Task 10: Send a sample or demonstration print Task 10: Send a sample or demonstration print To verify a successful configuration, choose a sample print in your application and try to print it on the printer. In case of problems, refer in this manual to Chapter 9, "Troubleshooting". To test whether the source of any problem is in the printer itself or in the link with your application, it is useful to print the printer's internal demonstration print. To print the demonstration print 1 If media is not already loaded, load roll media or a sheet, as explained in Chapter 2, which also provides advice on the availability and use of different media types. 2 Press simultaneously the two keys Setup and Cancel: SETUP FORM FEED REPRINT CANCEL 488CA The demonstration print summarizes the printer's main features and includes a sample CAD drawing, using a variety of line widths and colors. It is printed in the language currently configured in the Setup Sheet. To change the language, see task 6. The demonstration print of the HP DesignJet 488CA must be printed from the HP DesignJet 488CA software RIP. Please refer to the documentation supplied with this pack. 1-26