HP 9500hdn HP Color LaserJet 9500n and 9500hdn - Software Technical Reference - Page 75
Staple check box, Stapling Options dialog box - color laserjet specifications
UPC - 808736429689
View all HP 9500hdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Note 4. Click the Other Pages tab. On the Size is and Source is menus, select the size and source settings for the inside sheets of your print job. 5. Click the Back Cover tab. The back cover, if there is one, must be the same size as the booklet cover and the inside sheets. The No back cover is the default setting. If your print job has a back cover that uses the same source and type settings you selected in the First Page tab, select Use the first page source. If not, select Use an alternate source, and then select the back-cover settings in the Source is and Type is menus. Whenever you make changes to all of the pages (that is, when Use different paper is cleared), these changes are reflected in both the First Page and Other Pages settings whenever you set Use different paper. The Back Cover tab is not available when you select any Booklet Printing setting except Off (which is the default). When you use this feature, the last page of the print job is folded into the middle of the booklet. Staple check box Note The Staple check box, the Stapling button, and the Fold/Saddle Stitch check box are available only if you have an Accessory Output Bin with a stapling device installed on the printer and configured in the driver. The HP Color LaserJet 9500hdn comes standard with either an HP 3000-Sheet Stapler/Stacker or an HP Multifunction Finisher installed. Accessory Output Bins are not available for the HP Color LaserJet 9500n. To configure the Accessory Output Bin in the driver, click Start, click Settings, click Printers, right-click on the printer name, and then click Properties. Click the Configure tab, select your output device from the drop-down menu, and then click OK. Click the Staple check box if you want to use any of the stapling options for the HP 3000-Sheet Stapler/Stacker or the HP Multifunction Finisher. Stapling Options dialog box Click the Stapling button to open the Stapling Options dialog box. Use these settings to select the stapling options you want to apply to your document. The stapling options are only available when the Accessory Output Bin installed on your printer has a stapler (for example, the HP 3000-Sheet Stapler/Stacker or the HP Multifunction Finisher). The specific stapling options available depend on which Accessory Output Bin is installed. The following illustration shows the Stapling Options dialog box for the HP 3000-Sheet Stapler/Stacker. Figure 16: Stapling Options dialog box for HP 3000-Sheet Stapler/Stacker The following Stapling Options are available. Software Technical Reference ENWW HP traditional PCL 6 and PCL 5c driver features 73