Home » HP Manuals » Multifunction Devices » HP Color LaserJet 4730 » Manual Viewer

HP Color LaserJet 4730 HP LaserJet MFP - Analog Fax Accessory Guide - Page 56

Set redial interval, Set the outgoing fax resolution

View all HP Color LaserJet 4730 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Set redial interval The redial interval setting selects the number of minutes between retries if the number dialed is busy or not answering. NOTE: You might observe a redial message on the control panel when both the Redial-on-Busy and Redial-on-No-Answer settings are set to off. This occurs when the fax accessory dials a number, establishes a connection, and then loses the connection. As a result of this error condition, the fax accessory performs two automatic redial attempts regardless of the redial settings (the first one at 26,400 bps and, if that fails, a second one at 14,400 bps). During this redial operation, a message appears on the control panel to indicate that a redial is in progress. Set the redial-interval on the HP LaserJet 4345mfp and 9040/9050mfp, and the HP Color LaserJet 4730mfp and 9500mfp 1. On the control panel, press the Menu button to open the main menu. 2. Touch FAX to open the fax menu. 3. Scroll to and touch FAX SEND. 4. Scroll to and touch Redial Interval to open the setting screen. 5. Use the up and down arrows to select the number (1 through 5 minutes; default=5), and then touch OK. Set the redial interval on the HP LaserJet M3025 MFP, M3027 MFP, M4345 MFP, M5025 MFP, M5035 MFP, M9040 MFP, M9050 MFP and HP Color LaserJet CM4730 MFP and CM6040 MFP Series 1. On the control panel, scroll to and touch the Administration icon to open the Administration menu. 2. Scroll to touch Initial Setup to open the initial setup menu. 3. Touch Fax Setup to open the fax setup menu. 4. Touch Fax Send Settings and use the down arrow key to scroll to Redial Interval. 5. Touch the text box to display the keyboard. 6. Enter the value (1-5) and touch OK. 7. Touch Save. Set the outgoing fax resolution The outgoing fax resolution setting determines the maximum resolution supported by the receiving fax. The fax accessory uses the highest possible resolution (as limited by this setting) and the maximum resolution of the receiving fax. NOTE: Faxes wider than 21.25 cm (8.5 inches) are automatically sent by using standard or fine resolution, to reduce phone time. NOTE: The default resolution setting is a lower dpi than previous MFP model default resolution settings. For example, previous MFP models had a default resolution of FINE (200 x 200 dpi). NOTE: The higher the resolution, the longer the transmission time required. 48 Chapter 2 Set fax settings ENWW

Section	Page
Setup	9
Parts included with the fax accessory	10
Installing the fax accessory	11
Installing/replacing the fax accessory in the HP LaserJet 9040/9050mfp	11
Installing/replacing the fax accessory in the HP LaserJet 4345mfp	14
Installing/replacing the fax accessory in the HP LaserJet M4345 MFP	18
Installing/replacing the fax accessory in the HP Color LaserJet 4730mfp and HP Color LaserJet CM4730 ...	20
Installing/replacing the fax accessory in the HP LaserJet M5025 MFP and M5035 MFP	28
Installing/replacing the fax accessory in the HP Color LaserJet CM6040 MFP Series	31
Installing/replacing the fax accessory in the HP LaserJet M9040 MFP / M9050 MFP	39
Verifying fax operation	43
Required fax settings	44
Fax Configuration Wizard	44
Accessing fax settings menu	44
Set or verify the date and time for the HP LaserJet 4345mfp and 9040/9050mfp, and the HP Color Laser ...	44
Set or verify the date and time on the HP LaserJet M3035 MFP, M3027 MFP, M4345 MFP, M5025 MFP, M5035 ...	45
Set, verify, or change the MFP/fax accessory country/region	45
Set the fax header	46
Set fax settings	49
Remote fax configuration	50
Web browser	50
HP Web Jetadmin	50
HP MFP Digital Sending Software Configuration Utility	51
Send fax settings	52
Set the dial tone detection	52
Set the overlay header (outgoing faxes)	52
Set the dialing mode	53
Set a dialing prefix	53
Set the redial rules	54
Set redial-on-busy	54
Set redial-on-no-answer	55
Set redial interval	56
Set the outgoing fax resolution	56
Set billing codes	57
Set the JBIG compression mode	58
Change the sharpness setting	59
Change the background setting	59
Change the light/dark setting	60
Activate Fax Number Confirmation	60
Activate Fax Number Speed Dial Matching	61
Receive fax settings	62
Set rings-to-answer	62
Stamp received faxes (incoming faxes)	62
Set fit-to-page	63
Set the paper tray	63
Set the destination bin	64
Blocking incoming faxes	65
Create a blocked-fax list	65
Remove numbers from the blocked-fax list	65
Clear all numbers from the blocked-fax list	66
Initiate polling receive	67
Changing notification settings	67
Set the error correction mode	69
Set the modem volume	70
Set the ringer volume	71
Use Fax	73
Fax feature screen	74
HP LaserJet 4345mfp and 9040/9050mfp, and HP Color LaserJet 4730mfp and 9500mfp fax feature screen	74
HP LaserJet M3035 MFP, M3027 MFP, M4345 MFP, M5025 MFP, M5035 MFP, M9040 MFP, M9050 MFP and HP Color ...	75
Status message bar	77
Send a fax	78
Send a fax - enter number(s) manually	78
Send a fax using speed dial	81
Sending a fax using one touch speed dial	82
Search a speed-dial list by name	83
Sending a fax using phone book numbers	84
DSS fax phone book search	86
Canceling a fax	88
Cancel the current fax transmission	88
Cancel all pending faxes	88
Receiving faxes	90
Creating and deleting speed dial lists	91
Create a speed dial list	91
Delete a speed dial list	91
Delete a single number from the speed dial list	92
Add a number to an existing speed dial list	93
Assigning speed dial lists to one-touch keys	94
Assign a speed dial to a one-touch key for the HP LaserJet 4345mfp and 9040/9050mfp, and the HP Colo ...	94
Clear or reassign speed dial lists to one-touch keys for the HP LaserJet 4345mfp and 9040/9050mfp, a ...	94
Voice Calls and Retries	95
Fax Call Report	95
Fax Activity Log	95
T.30 Report	95
Secure settings	96
Change your PIN	96
Set fax forwarding	98
Scheduling fax printing (memory lock)	99
Fax-printing behavior	99
Enable or disable the schedule for printing of faxes	100
Create a fax printing schedule	101
Using Fax over VoIP networks	103
Solve fax problems	105
Is your fax set up correctly?	106
What type of phone line are you using?	106
Are you using a surge-protection device?	106
Are you using a phone company voice-messaging service or an answering machine?	106
Checking fax accessory status	107
Fax feature is not operating	108
General fax problems	109
Receiving fax problems	110
Sending fax problems	112
Error codes	113
Fax error messages	114
Send-fax messages	115
Receive-fax messages	116
Fax logs and reports	117
Printing the fax call report (include thumbnail)	117
To schedule fax call report printing	118
Printing the fax activity log	119
Printing the billing code report	120
Clearing the fax activity log and billing code report	120
Printing the blocked fax list report	121
Printing the speed dial list report	121
Service settings	123
Firmware upgrades	125
Service and support	127
Hewlett-Packard limited warranty statement	128
HP Customer Care	129
World Wide Web	129
E-mail	129
Phone	129
Specifications	131
Fax accessory product specifications	132
Replacement parts and accessories	133
Regulatory Information	135
Environmental Product Stewardship Program	136
Declaration of conformity	137
US Federal Communications Commission	138
FCC Part 15 Compliance Statement	138
FCC Part 68 Telecom	138
Telephone Consumer Protection Act (US)	139
Canadian Department of Communications	140
Canadian Limitations Notice	140
Other regulatory information	141
Regulatory information for EU countries/regions	141
New Zealand Telecom Warning Notice	141
South African Notice	142
TAIWAN BSMI Class A Warning	142

Match case Limit results 1 per page

Set redial interval

The redial interval setting selects the number of minutes between retries if the number dialed is busy or

not answering.

NOTE:

You might observe a redial message on the control panel when both the

Redial-on-Busy

and

Redial-on-No-Answer

settings are set to off. This occurs when the fax accessory dials a number,

establishes a connection, and then loses the connection. As a result of this error condition, the fax

accessory performs two automatic redial attempts regardless of the redial settings (the first one at 26,400

bps and, if that fails, a second one at 14,400 bps). During this redial operation, a message appears on

the control panel to indicate that a redial is in progress.

Set the redial-interval on the HP LaserJet 4345mfp and 9040/9050mfp, and the HP Color LaserJet 4730mfp

and 9500mfp

On the control panel, press the

button to open the main menu.

Touch

FAX

to open the fax menu.

Scroll to and touch

FAX SEND

Scroll to and touch

Redial Interval

to open the setting screen.

Use the up and down arrows to select the number (1 through 5 minutes; default=5), and then touch

Set the redial interval on the HP LaserJet M3025 MFP, M3027 MFP, M4345 MFP, M5025 MFP, M5035 MFP,

M9040 MFP, M9050 MFP and HP Color LaserJet CM4730 MFP and CM6040 MFP Series

On the control panel, scroll to and touch the

Administration

icon to open the Administration menu.

Scroll to touch

Initial Setup

to open the initial setup menu.

Touch

Fax Setup

to open the fax setup menu.

Touch

Fax Send Settings

and use the down arrow key to scroll to

Redial Interval

Touch the text box to display the keyboard.

Enter the value (1–5) and touch

Touch

Save

Set the outgoing fax resolution

The outgoing fax resolution setting determines the maximum resolution supported by the receiving fax.

The fax accessory uses the highest possible resolution (as limited by this setting) and the maximum

resolution of the receiving fax.

NOTE:

Faxes wider than 21.25 cm (8.5 inches) are automatically sent by using standard or fine

resolution, to reduce phone time.

NOTE:

The default resolution setting is a lower dpi than previous MFP model default resolution

settings. For example, previous MFP models had a default resolution of FINE (200 x 200 dpi).

NOTE:

The higher the resolution, the longer the transmission time required.

Chapter 2

Set fax settings

ENWW