HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 30
Power-On Self-Test, The server begins the Power-On Self-Test POST sequence. The Integrated Management
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Service Preparation 7. Watch for memory system initialization. Memory system initializes as the memory cartridge power LEDs on all five memory cartridges begin blinking. After the memory system is initialized, all memory cartridges power LEDs will illuminate solid. 8. The server begins the Power-On Self-Test (POST) sequence. The Integrated Management Display (IMD) displays each step of the POST sequence. Power-On Self-Test As the POST process continues during server power-up: 1. Check for the IMD messages about the following: a. Server name b. LCD firmware c. System initialization d. PCI auto configuration e. Video f. Processors 2. Check the IMD video initialization message. If there is a monitor connected, refer to the HP initialization screen. 3. Check the IMD memory test message. The monitor displays the memory initialization, memory detected, and redundant memory. 4. Check the IMD processors message. The monitor displays the number, speed, and cache size of the processors. 5. Check for IMD messages about the following: a. Diskette drive b. Option ROM c. SCSI devices HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:04 PM 2-11