HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 41
Cable Management Arm, I/O module 1.
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chassis Components Removal and Replacement Procedures Cable Management Arm To remove the cable management arm: 1. Label all cables running through the cable management arm. 2. Disconnect all cables from the rear of the I/O module. 3. Loosen the thumbscrew that secures the cable management arm and bracket to the I/O module (1). 4. Move the bracket, with cable management arm attached, slightly up and then back from the server (2) to access the cam levers on the I/O module. Figure 3-7: Disconnecting the cable management bracket from the I/O module HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide 3-7 HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:05 PM
Chassis Components Removal and Replacement Procedures
Cable Management Arm
To remove the cable management arm:
1.
Label all cables running through the cable management arm.
2.
Disconnect all cables from the rear of the I/O module.
3.
Loosen the thumbscrew that secures the cable management arm and bracket to the
I/O module (1).
4.
Move the bracket, with cable management arm attached, slightly up and then back from
the server (2) to access the cam levers on the I/O module.
Figure 3-7:
Disconnecting the cable management bracket from the
I/O module
HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide
3-7
HP CONFIDENTIAL
Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:05 PM