HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 55
Power On/Standby Switch Assembly, Refer to Media Module C able Routing Diagram in
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Media Module Removal and Replacement Procedures Power On/Standby Switch Assembly To remove the Power On/Standby switch assembly: 1. Power down the server. Refer to "Power ing Down the Server " in Chapter 2. 2. Remove the media module. Refer to "Media Modul e" in this chapter. 3. Remove the media module bezel. Refer to "Media Module Bezel" in this chapter. 4. Turn the media module upside down. 5. Unplug the IMD cable from the media backplane board. Refer to "Media Module Cable Routing Diagram" in this chapter. 6. Remove the IMD. Refer to "Integrated Management Display" in this chapter. 7. Disconnect the Power On/Standby switch connector from the media backplane board (1). Refer to "Media Module C able Routing Diagram" in this chapter. 8. Loosen the thumbscrew that secures the power switch plate to the media backplane board (2). Figure 4-11: Unplugging the power switch cable and loosening the thumbscrew HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:06 PM 4-13