HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 58
Tighten the thumbscrew., plate lines up with the thumbscrew.
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Media Module Removal and Replacement Procedures To reinstall the Power On/Standby switch assembly: 1. Place the power switch plate on its left side and push the Power On/Standby switch up through the rectangular cutout to its original position. 2. Line up the keyhole-shaped cutouts on the power switch plate with the spools in the right wall of the media module. 3. Slide the plate back into the media module until the hole in the back of the power switch plate lines up with the thumbscrew. 4. Tighten the thumbscrew. 5. Push the Power On/Standby switch LED through the power switch plate to its original position. 6. Push the Thermistor through the power switch plate. 7. Rotate the Thermistor to its original position. 8. Reverse steps 1 through 7 of the removal procedure. 4-16 HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:06 PM