HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 97
-slot Hot-Plug Basket
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
I/O Module Removal and Replacement Procedures 11-slot Hot-Plug Basket To remove the 11-slot hot-plug basket: 1. Power down the server. Refer to "Pow ering Down the Server" in Chapter 2. 2. Open the I/O lid. Refer to "I/O Lid" in Chapter 3. 3. Remove all installed expansion boards in slots 1 through 11. Refer to "Non-Hot Plug Expansion Boards" in this chapter. 4. Open the lever next to the array enabler board (1) and remove the board (2). Figure 6-21: Removing the array enabler board 6-22 HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:10 PM
I/O Module Removal and Replacement Procedures
11-slot Hot-Plug Basket
To remove the 11-slot hot-plug basket:
1.
Power down the server. Refer to “Pow ering Down the Server” in Chapter 2.
2.
Open the I/O lid. Refer to “I/O Lid” in Chapter 3.
3.
Remove all installed expansion boards in slots 1 through 11. Refer to “Non-Hot Plug
Expansion Boards” in this chapter.
4.
Open the lever next to the array enabler board (1) and remove the board (2).
Figure 6-21: Removing the array enabler board
6-22
HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:10 PM