HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 39
System Midplane Assembly, Open the I/O lid. Refer to I/O Lid in
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chassis Components Removal and Replacement Procedures System Midplane Assembly The system midplane assembly is the board to which the power supply connects. To remove the system midplane assembly: 1. Power down the server. Refer to "Pow ering Down the Server" in Chapter 2. 2. Open the I/O lid. Refer to "I/O Lid" in this chapter. 3. Remove and disconnect all modules and power supplies. Refer to the sections, "Media Module" in C hapter 4, "Pro cessor and Memory Module" in Chapter 5, "Removing the I/O Module" in Chapter 6, "and "Hot-Plug Power Su pply" in t his chapter. 4. Loosen the two thumbscrews securing the system midplane assembly to the chassis (1). 5. Remove the board from the chassis (2). Figure 3-5: Removing the system midplane assembly HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide 3-5 HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:05 PM