HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 34
Re-entering the Server Serial Number, System Options, Serial Number, Enter, Escape
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Service Preparation Re-entering the Server Serial Number After you replace the server I/O module or clear the NVRAM, you must re-enter the server serial number through RBSU. To re-enter the serial number: 1. During the server startup sequence, press the F9 key to access RBSU. 2. Select the System Options menu. 3. Select Serial Number. The following warning is displayed: WARNING! WARNING! WARNING! The serial number is loaded into the system during the manufacturing process and should NOT be modified. This option should ONLY be used by qualified service personnel. This value should always match the serial number sticker located on the chassis. Press the Enter key to clear the warning. 4. Enter the serial number and press the Enter key. 5. Press the Escape key to close the menu. 6. Press the Escape key to exit RBSU. 7. Press the F10 key to confirm exiting RBSU. The server will automatically reboot. HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:04 PM 2-15