HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 81

I/O Module Removal and Replacement Procedures I/O Expansion Boards Locating the I/O Expansion Slots The I/O expansion slots are located in the I/O module and are accessed by opening the I/O lid as described in "I/O Lid" in Chapter 3. The I/O expansion slots are distributed among one primary PCI bus and five separate peer PCI-X buses. WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. Figure 6-5: Top view of I/O slots Table 6-1: I/O Expansion Slots Slot Description Slots 1 and 2 Bus 19-su pports PCI-X expansion boards at 100 MHz and 66 MHz or PCI expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3 V signaling. Slots 3 and 4 Bus 15-su pports PCI-X expansion boards at 100 MHz and 66 MHz or PCI expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3 V signaling. Slots 5 and 6 Bus 11-su pports PCI-X expansion boards at 100 MHz and 66 MHz or PCI expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3 V signaling. Slots 7 and 8 Bus 7-sup ports PCI-X expansion boards at 100 MHz and 66 MHz or PCI expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3 V signaling. Slot 9 Bus 0-sup ports PCI expansion boards at 33 MHz; it is keyed for 5 V signaling. Slots 10 and 11 Bus 3-sup ports PCI-X expansion boards at 100 MHz and 66 MHz or PCI expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3 V signaling. Note: The operating system detects PCI devices in the following slot order: 9-10-11-7-8-5-6-3-4-1-2. 6-6 HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:10 PM